smara - Adveeta Biotech
smara is a Fully Automatic Discret Random Access Bench Top Clinical Chemistry Analyzer capable of performing routine and special biochemistry enzymes, substrates, drug assays, serum proteins to perform throughput 100 tests per hour, it's easy to use menu driven software makes the equipment very user friendly along
with DUAL probe which ensures high accuracy and precise results. An Efficient and Economical equipment a must for small medium sized diagnostic center.
Reagent probe
High grade stainless steel – preheated with liquid level detection with aspiration / dispensing volume range from 50 to 500ul, Probe cleaning done both
internally and externally. Reagent pick up and dispensing is done through a specially designed dilutor for high accuracy and precision
Sample probe
Aspiration / dispensing through high grade stainless steel with liquid level detection capable of picking sample volume from 2.5 to 30ul, probe cleaning is done
both internally and externally, the sample needle has a built-in two stage vibrator for mixing samples. Sample pick up and dispensing is done through a specially designed dilutor for high accuracy and precision
Reaction cuvettes
Reaction cuvettes - the instruments comes with uniquely designed 50 disposable reaction cuvettes with 10 segments of 5 cuvettes, minimum reaction volume of 200ul.
The temperature of reaction cuvettes is maintained @37°C by way of incubating coil
Sample tray
Has 26 open positions for samples, standard, calibrator and controls, with adaptability to primary tubes as well as pediatric cups, minimum sample
volume for pediatric being 60 μl
Reagent tray
Has 26 open R1 and R2 positions with 13 slots for 10ml and 30 ml system packs, It also has a built in refrigeration system( peltier based) for cooling between 10°C
to 15°C below ambient temperature
Built-in stabilizer
smara is equipped with a Built-in in stabilizer- externally located power supply capable of operating the equipment between 115-230 volts +/- 10%, 50 to 60 hz
Liquid management
Non vaccumised wash and waste bottle with level sensing Wash bottle is equipped with water conductivity sensor thus ensuring proper water quality. Waste bottle is also equipped with a level sensor. Capacity of wash and waste bottle is 2 liters
Built in computer
Built in computer intel Celeron(r) CPU J1900 @. 1.99GHz, 2 GB RAM , windows embedded 32 bit operating system with 500 GB hard disk
Modes, End point, Kinetic, Fixed time, Differential, Ratio
Dynamic Color-coded Operation Wheel showing online status of Reagent, Sample and Reaction system
Stat facility for emergency samples
Calibration- linear Single point, Dual point and Multi point
User defined programming of Profiles and Calculations
Continuous sample loading
Dynamic Online graph and results
Auto dilution for non linear samples
Predilution - known high samples can be prediluted to user programmed dilution ratio
Pediatric sample - specially designed pediatric cups to run low volume samples
Reagent level check for adequate reagent in system packs before initial sample run
Bidirectional interface LIS connectivity
External bar code interface(optional) for samples
Real time diagnosis of system status
External printer connectivity
Turbidimetric parameters such as CRP, ASO, RF can be performed economically ,accurately and precisely using one of a kind precalibrated Smart Key, these liquid stable reagents come in a ready to use system packs with convenient test wise pack sizes.
prietest R-SYS..Turbidimetric Latex Enhanced Test Kits with Electronic Calibration Key.
prietest R-SYS…Liquid Stable System Pack Reagent, Control, Calibrator, Wash Solution are manufactured in an FDA approved facility with ISO 9001, ISO 13485 and CE certification with convenient pack sizes and better on board stability.
prietest R-SYS…Clinical Chemistry Reagents (IVD Test Kits)
priecal Multi Cal Reagent
prieclean..Wash Solution
prietest Control Reagent
System type
Fully Automatic, Discrete, Random Access, STAT sample priority
Throughput
100 Tests/Hour
Type of tests
Routine & Special Biochemistry Enzymes, Substrates,
Drug Assays, Serum Proteins
Analysis mode
End Point, Fixed Time, Kinetic, Linear/Non-Linear Multipoint Calibration
Programming
Open System for User Defined Profiles and Calculations
Absorbance range
0.000 to 3.000 Abs. Unit
Filters
Interference Filters 340, 405, 450, 510, 545, 578, 630, 700 nm + 2 Optional
Calibration & control
Linear (1 Point, 2 Point, Multipoint), Point to Point Quality Control by Levey Jennings / Westgard Rules
Reagent probe
50 to 500 μl range, level sensing, preheated
Sample probe
2.5 to 30 μl range level sensing
Reaction cells
50 Cells made of high quality plastic
Onboard cooling
Peltier based with 10°C to 15°C from ambient temperature
Sample positions
26 sample positions accommodates Pediatric and Stat samples
Reagent positions
26 position for R1 and R2 reagents
Light mode
Uniquely designed light engine
Interface
Bidirectional interface with LIS connectivity
Wash bottle
Non vaccumsied with water conductivity and level sensor Capacity 2 Liters
Waste bottle
Non vaccumsied with level sensor Capacity 2 Liters
Power supply
115-230 volts, 50 - 60 Hz ± 10 %
Dimensions in mm (lxbxh)
890 x 430 x 580 mm (Approx)
Power
300 VA
Weight
45 kgs. (Approx)